Setting Wireless NanoBridge M5 As Station

before setting up your wireless Nano Bridge M5 you have to change the lan ip address on your laptop, and here I make my laptop ip address 192.168.1.8 ip address while wireless 192.168.1.20 as shown below

This will bring up a menu to enter the login username and password, enter your own username and password as shown below

Then click on the "wireless" in wireless mode and create a "station" then select "select" scan for access points that we want to konekkan, like in the picture below appears 2 access point and then select the access point you want to connect to your station,

 

Then in the wireless menu and select the channel width to 20 MHz and the output power adjust to your needs, setting an example that I can see in the picture below.

 Network menu select network modes: Bridge for ip address please on set, as you wish but make sure the ip is in use is not in use by another machine, or another computer, so the future for meremotenya and play around portforwading in proxy for long distances can be more easily . Matter of this ip please create yourself, because only in use for remotely. (at least that's my opinion)

Click Change to save the configuration Network